From date 18.02.2010, BLISSTOOL LTC48X is available in the market in two versions: version 1 (LTC48X v1) and version 2 (LTC48X v2).
On the front panel of the metal detector both versions are labeled LTC48X, but on the box with the electronics, additionally marked is the exact version of the metal detector.
LTC48X v1 and LTC48X v2 contain the following improvements:
/1/ Improved shielding against electromagnetic interference of the electronics; /2/ 25% increase in the depth of discrimination which can be adjusted by potentiometer DISCR DEPTH; /3/ Optimized ground rejecting in the automatic mode; /4/ Improved small and large fixing ring of the carrier construction; /5/ New model BLISSTOOL automatic battery charger.
With exception of the above described improvements, LTC48X v1 is completely identical with sold to date 12.02.2010 version LTC48X. Therefore, LTC48X v1 full replaces version LTC48X.
LTC48X v1 is the standard version, LTC48X v2 is a version specially adapted for heavy field conditions.
LTC48X v1 differs from LTC48X v2 on this that LTC48X v2 is optimized to work on: - highly contaminated terrains; - highly mineralized terrains; - terrains with a high content of ore.
Of the above described terrains, LTC48X v1 also works, but LTC48X v2 is additional optimized for such terrains.
For this purpose, compared with LTC48X v1, LTC48X v2 contain the following optimizations:
[1] Discrimination optimized for highly contaminated with iron, steel and other ancient and contemporary pollutants terrains: - improved rejection of small heavily corroded iron and steel, small pieces of wire, heavily corroded pieces of sheet metal, small iron nails and steel nails, tack, slag and other ancient and contemporary pollutants; - increased range of the discrimination level set by potentiometer DISCR LEVEL. [2] Behavior optimized for working on highly mineralized terrains and terrains with a high content of ore. The ground and ground-specific background of such terrains, which makes the detector "noisy", are ignored in a better extent.
The depth of detection is theoretically better in LTC48X v1, but in practice with both versions are achieved excellent results. It which must be borne in mind, is that in LTC48X v2 because has increasing range of discrimination by potentiometer DISCR LEVEL, should not be set higher than the necessary level of discrimination. Otherwise, will be losing some of the maximum possible depth of detection! In LTC48X v1, in discrimination mode, of most terrains of practice may safely to work at levels of 6 to 10 of potentiometer DISCR LEVEL. In LTC48X v2, in discrimination mode, the optimum levels of potentiometer DISCR LEVEL are from level 4 to about level 6, and potentiometer DISCR WIDTH usually not used (is set at level NORM).
All our current customers who have ordered BLISSTOOL LTC48X and to date 12.02.2010 the shipment with the metal detector has not been sent, and all our future clients, should indicate which version they wish: LTC48X v1 or LTC48X v2. For already taken orders directly to BLISSTOOL in Bulgaria, the prices for both versions are identical.
Which version is right for you to judge yourself according to your specific needs. LTC48X v1 has a maximum depth of detection, but LTC48X v2 works better of highly contaminated terrains.
Additional information for BLISSTOOL LTC48X is available here.
Currently, you have the unique chance to buy a BLISSTOOL metal detector with 15% discount, valid for real made and 100% prepaid order. Order and prepay now your BLISSTOOL metal detector to save money. ... Read more...
BLISSTOOL developed and begun serial production of metal detectors BLISSTOOL LTC64 and BLISSTOOL LTC64X. Metal detectors BLISSTOOL LTC64 and BLISSTOOL LTC64X are representatives of the new generation BLISSTOOL metal... Read more...
In Belgium, the German-Belgian team of Metalldetektortest.eu and DetectorTest.info (Guide for determing the best detector) made independent field test of metal detector BLISSTOOL LTC48X. The test is type "TEST... Read more...
All BLISSTOOL metal detectors from models LTC48X and LTC48, purchased to date 12.02.2010, can be updated with described here improvements of LTC48X v1 and/or LTC48X v2. The update is realized through complex changes... Read more...
From date 18.02.2010, BLISSTOOL LTC48X is available in the market in two versions: version 1 (LTC48X v1) and version 2 (LTC48X v2). On the front panel of the metal detector both versions are labeled LTC48X, but on the... Read more...
BLISSTOOL completed development and begun serial production of external power module BLISSTOOL EBP01B. Whereby the battery of BLISSTOOL metal detectors from series LTC is exported outside from the metal detector to... Read more...
BLISSTOOL developed and begun serial production of 28cm (11") DD search coil BLISSTOOL DD28SC1. It was developed specifically for BLISSTOOL metal detectors of LTC series.Characterized by a very good balance... Read more...
There are no translations available BLISSTOOL завърши разработката и започна серийно производство на автоматично зарядно устройство BLISSTOOL... Read more...
From today, 12.11.2009, in BLISSTOOL on-line shop, can pay for ordered from you products through PayPal account, credit and debit cards (MasterCard, Visa, Visa Electron, American Express). Additional information is... Read more...
There are no translations availableBLISSTOOL стартира нова категория новини, озаглавена Древни находки и открития, с цел осигуряване на... Read more...
There are no translations availableМнението е лично, не ангажирам никого, но се надявам да предизвикам дискусия. ЗА ЗАКОНА: Остарял е с... Read more...
